| RabbitCore RCM2300 Specifications |
| Feature |
RCM2300 |
Microprocessor |
Rabbit 2000™ at 22.1 MHz |
Flash |
256K |
SRAM |
128K |
Backup Battery |
Connection for user-supplied battery (to support RTC and SRAM) |
General Purpose I/O |
29 I/O include
| • 17 configurable I/O |
| • 8 fixed inputs |
| • 4 fixed outputs |
(9 additional available via separate connections) |
Additional Inputs |
2 Startup Mode, Reset |
Additional Outputs |
Status, Reset |
Memory I/O |
4 address, 8 data, plus I/O Read-Write
(extra address and Buffer Enable via separate connections) |
Serial Ports |
Four 5 V CMOS-compatible, 2 configurable as clocked ports (1 clocked line available only on programming header) |
Serial Rate |
Max. burst rate = CLK/32
Max. sustained rate = burst/2 |
Connectors |
Two 2 x 13, 2 mm IDC headers |
Slave Interface |
Slave port permits use as master or as intelligent peripheral with Rabbit-based or other master controller. |
Real-Time Clock |
Yes |
Timers |
Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers |
Watchdog/Supervisor |
Yes |
Power |
4.75–5.25 V DC, 108 mA |
Operating Temp. |
–40° to +85°C |
Humidity |
5–95%, non-condensing |
Board Size |
1.60" x 1.15" x 0.47"
(41 x 29 x 12 mm) |
Productos
