| RabbitCore RCM3000 Specifications |
| FEATURE |
RCM3000 |
RCM3010 |
| Microprocessor
|
Rabbit 3000 at 29.4 MHz |
| EMI Reduction
|
Spectrum spreader for reduced EMI (radiated emissions) |
| Ethernet Port
|
10Base-T, RJ-45, 2 LEDs |
| Flash
|
512K (2 x 256K) |
256K |
| SRAM
|
512K |
128K |
| Backup Battery
|
Connection for user-supplied battery (to support RTC and SRAM) |
| General-Purpose I/O
|
52 digital I/O:
| • 44 configurable I/O |
| • 4 fixed inputs |
| • 4 fixed outputs |
|
| Additional Inputs
|
2 Startup Mode, Reset In |
| Additional Outputs
|
Status, Reset Out |
| Auxiliary I/O Bus
|
8 data and 6 address (shared with I/O), plus I/O Read-Write |
| Serial Ports
|
6 CMOS-compatible:
| • |
6 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI), and 2 as SDLC/HDLC (with IrDA) |
| • |
1 asynchronous clocked serial port dedicated for programming |
| • |
Support for MIR/SIR IrDA transceiver |
|
| Serial Rate
|
Max. asynchronous baud rate = CLK/8 |
| Slave Interface
|
Slave port permits use as master or intelligent peripheral
with Rabbit-based or other master controller |
| Real-Time Clock
|
Yes |
| Timers
|
Ten 8-bit timers (6 cascadable from the first) and one 10-bit timer with 2 match registers |
| Watchdog/Supervisor
|
Yes |
| Pulse-Width Modulators
|
10-bit free-running counter and four pulse-width registers |
| Input Capture
|
2-channel input capture can be used to time input signals from various port pins. |
| Quadrature Decoder
|
2-channel quadrature decoder accepts inputs from external incremental encoder modules. |
| Power
|
3.15–3.45 V DC
150 mA @ 3.3 V |
| Operating Temp.
|
–40° to +70°C |
| Humidity
|
5–95%, noncondensing |
| Connectors
|
Two 2 x 17 (2 mm pitch) |
| Board Size
|
2.73" × 1.85" × 0.86"
(69 × 47 × 22 mm) |
Productos
